Bicks's PinIO Setup Wizard

A configuration utility for the MultiView, VTX Assassin, or any other PinIO device.

Resource Dump

Type resource in your BetaFlight / CleanFlight compatible CLI, and paste the results in the box below.

PinIO Configuration

PinIO 1:

This is the pin on your FC that your device is wired to.

When the above mode (as configured in the modes tab of your configurator) is activated, your PinIO device will activate. To bind the PinIO device to a custom mode, choose User 1-4

PinIO 2:

This is the pin on your FC that your device is wired to.

When the above mode (as configured in the modes tab of your configurator) is activated, your PinIO device will activate. To bind the PinIO device to a custom mode, choose User 1-4

PinIO 3:

This is the pin on your FC that your device is wired to.

When the above mode (as configured in the modes tab of your configurator) is activated, your PinIO device will activate. To bind the PinIO device to a custom mode, choose User 1-4

PinIO 4:

This is the pin on your FC that your device is wired to.

When the above mode (as configured in the modes tab of your configurator) is activated, your PinIO device will activate. To bind the PinIO device to a custom mode, choose User 1-4

Output

Paste the following block of code (you can do them all at once or individually) into the command area of your CLI tab, and hit enter.